Tel: 0535-6106525 | Mail: ytlhqz@live.cn


您现在的位置:首页>>新闻信息

钢板起重钳使用手册一:正确处理(0535-6106705)

为了避免事故发生的就要遵循指定程序来正确处理和标准检测钢板起重钳,这也将提高其工作效率和利用率,从而延长使用寿命、降低成本。

我公司本着诚恳的态度为客户提供鹰牌钢板起重钳和世霸钢板起重钳价格和参数。以下是关于钢板起重钳正确处理方法:

1.对于存储类型说明。

      每天在户外使用完毕后,务必要将它们存储在室内,根据各种钢板起重钳类型要求存储在无粉尘无污染的相应环境。

2.对于常规检查和维护保养。

      在使用前需要检查钢板起重钳的损坏程度,确保安全使用;使用完毕,需要对其清理;做相应记录。

      无论是否使用,对钢板钳的检查维护至少每月一次,每次需要进行润滑操作(钢板钳保养)。

3.不可使用受损钢板起重钳。

      出现变形或受损的产品不可使用,应立即更换。

      使用前,应检查标签,查看本月使用情况。

4.应早期置换钢板起重钳。

      钢板起重钳的功能零部件受损导致适用范围受到严重局限的时候,仍在使用那是十分危险的!

      在实际操作中,当钢板起重钳正在长时间高频举升重物作业时,应提前调节好锁档凸轮和旋转夹口。

烟台开发区龙海起重工具有限公司是EAGLE CLAMP鹰牌/世霸代理厂商,公司有实体店经营、有自我品牌、有相关营业证明,安全可靠。


举例:

鹰牌NEC型钢板起重钳实际应用图:

鹰牌NEC型钢板起重钳实际应用图

 


英文介绍:
     The first step in avoiding accidents is to follow the specified procedures for handling and inspecting clamps. This will also improve operating efficiency and extend the service of the clamps,which will reduce costs.
correct handling
1:Indoor storage by clamp type
・     At the end of work each day, never leave the clamps outdoors.
・     Be sure to store them in a protected area, sorted by clamp type
2:Routine inspection and maintenance
・     Be sure to inspect the clamps before starting work each day and service them at the end of work each day.
・     Inspect and service the clamps regularly, whether the clamps have been used or not. (At least once a month)
・     When inspecting or servicing the clamps,be sure to lubricate them.
3:The use of damaged clamps is strictly prohibited
・     Deformed or damaged clamps must not be used. .They They should be replaced promptly.
・     Before starting work,check the inspection label.(which shows the month)of each clamp.
4:Early replacement
・     It is dangerous to keep using replaceable parts right up to the very limit of what is permissible.
・     In the field, when hardened objects are being lifted, or when lots of steel plates with the same thickness are being handled one after another, replace the cams and swivel jaws ahead of schedule.

 

龙海起重工具的钢板起重钳销售全国及国外部分地区,质保期内有任何问题请联系公司人员,为您分忧解难。客户从我公司定购此产品如发现假货仿货均以10倍金额赔偿

 


相关新闻: 钢板起重钳使用手册二:检验标准(0535-6106705)


相关产品

鹰牌VAS型钢板钳鹰牌VAS型钢板钳

品牌:鹰牌(EAGLE)横向钢板起重钳 型号:鹰牌VAS型钢板钳 热度:701

详情 »


鹰牌SAS型钢板起重钳鹰牌SAS型钢板起重钳

品牌:鹰牌 型号:SAS型 热度:2389

详情 »


鹰牌SAR型钢板起重钳鹰牌SAR型钢板起重钳

品牌:鹰牌 型号:SAR型 热度:2287

详情 »